A-1 EngineeringFire safety engineering · Perth

Insights · Performance Solutions

What is a fire safety Performance Solution, and when do you need one?

A guide for architects, builders and developers to Performance Solutions and when a design may need fire engineering.

Start your quote today
Architectural floor plans marked up with egress paths and travel distances on a fire engineer's desk
Illustrative image.
The key idea

A fire safety Performance Solution assesses a design that takes a different approach to the building code’s standard provisions. It must still demonstrate that the relevant fire safety requirements are met.

See the four steps in the process ↓

Compliance options

The National Construction Code (NCC) sets the requirements a building must meet. A design can use:

  • Deemed-to-Satisfy (DtS): follow the code’s standard provisions.
  • A Performance Solution: demonstrate through an accepted assessment method that a different approach meets the relevant requirements.
  • A combination: use each approach for different parts of the design.

When you may need one

A design may need fire engineering when it differs from the standard provisions for:

  • Exit distances, widths, numbers or stair arrangements
  • Fire compartment sizes or fire resistance
  • Smoke management, atria or connected spaces
  • Fire brigade access, hydrants or booster locations

Your building surveyor’s BCA report can help identify these departures. A fire engineer then assesses the options for your project.

How it works in WA

StepWhat happens
1. Agree the briefThe fire engineer and stakeholders define the scope, methods and acceptance criteria in the PBDB / Fire Engineering Brief (FEB).
2. Assess the designCarry out the agreed calculations, modelling or other assessment.
3. Check the resultsCompare results with the criteria and refine the design where needed.
4. Record the outcomeThe Fire Engineering Report (FER) documents the assessment and required fire safety measures.

DFES consultation may form part of the project. Follow its current guidance.

Who prepares and reviews it?

The fire engineer develops the Performance Solution. The building surveyor considers the submitted material against the applicable building requirements. Check the WA registration requirements when engaging an engineer.

How A-1 can help

A-1 provides design advice, fire and evacuation modelling, and FEBs and FERs. Share your available drawings, BCA report and project stage so we can scope the support you need.

A-1 Engineering

General information from A-1 Engineering.

Need advice on your project?

Upload your drawings and project details for a scoped, fixed-fee proposal.

Request a Proposal